Bow Building
- thewindiw
- Scout
- Posts: 251
- Joined: June 14th, 2016, 8:18 pm
- Contact:
Re: Bow Building
I put ketchup on my steak . I think anything would be cool... I would love to even be able to make something half as nice as any of yours!
It hops it drops, it flies it dies, if it gets away you shot it in the wrong way= thewindow
- InstinctiveArcher
- Outfitter
- Posts: 4876
- Joined: May 2nd, 2015, 10:57 am
- Contact:
Re: Bow Building
Thanks windiw! If you give it a try, I'm sure you could make a really nice looking bow.
Radamus, here is what I'm thinking. These plans are for a "semi-traditional" longbow
http://tradgang.com/noncgi/ultimatebb.p ... 5;t=014506
Radamus, here is what I'm thinking. These plans are for a "semi-traditional" longbow
http://tradgang.com/noncgi/ultimatebb.p ... 5;t=014506
In hunting, impossible doesn't exist any more than a sure thing does. - Tom Miranda
- TreeKiwi
- Community Manager
- Posts: 2674
- Joined: May 17th, 2017, 8:51 pm
- Contact:
Re: Bow Building
I'm looking forward to follow you on this build mate! I love wood working and something this complex will be very inspirational. Looking forward to watching the build for sure
- Radamus
- Master Hunter
- Posts: 8843
- Joined: January 23rd, 2014, 7:05 pm
- Location: NW Ohio
- Contact:
Re: Bow Building
I like the shorter look to that one- Man, couple guys there know their sht building bows eh! The only scary part for me would be all that shaping on the riser.InstinctiveArcher wrote:Thanks windiw! If you give it a try, I'm sure you could make a really nice looking bow.
Radamus, here is what I'm thinking. These plans are for a "semi-traditional" longbow
http://tradgang.com/noncgi/ultimatebb.p ... 5;t=014506
"Out of all competitors, Radamus was the only one who got it I think" - BCKidd
"Ugh, I absolutely hate the thought that Radamus is right about this and I was wrong...!!!" Splainin2do
I can't afford a swear jar - xOEDragon
"Ugh, I absolutely hate the thought that Radamus is right about this and I was wrong...!!!" Splainin2do
I can't afford a swear jar - xOEDragon
Spoiler:
- InstinctiveArcher
- Outfitter
- Posts: 4876
- Joined: May 2nd, 2015, 10:57 am
- Contact:
Re: Bow Building
Yeah, some of these guys are insane with some of the things they come up with. Always plenty of eye candy there!Radamus wrote:I like the shorter look to that one- Man, couple guys there know their sht building bows eh! The only scary part for me would be all that shaping on the riser.InstinctiveArcher wrote:Thanks windiw! If you give it a try, I'm sure you could make a really nice looking bow.
Radamus, here is what I'm thinking. These plans are for a "semi-traditional" longbow
http://tradgang.com/noncgi/ultimatebb.p ... 5;t=014506
The riser shaping isn't really that bad. A spindle sander cuts down on the time it takes, but using hand tools isn't that bad, and isn't quite as risky.
In hunting, impossible doesn't exist any more than a sure thing does. - Tom Miranda
- JimboCrow
- Outfitter
- Posts: 2609
- Joined: December 26th, 2011, 2:36 pm
- Location: Riverpine Cabin
- Contact:
Re: Bow Building
That's what she said!InstinctiveArcher wrote:Yeah, some of these guys are insane with some of the things they come up with. Always plenty of eye candy there!Radamus wrote:I like the shorter look to that one- Man, couple guys there know their sht building bows eh! The only scary part for me would be all that shaping on the riser.InstinctiveArcher wrote:Thanks windiw! If you give it a try, I'm sure you could make a really nice looking bow.
Radamus, here is what I'm thinking. These plans are for a "semi-traditional" longbow
http://tradgang.com/noncgi/ultimatebb.p ... 5;t=014506
The riser shaping isn't really that bad. A spindle sander cuts down on the time it takes, but using hand tools isn't that bad, and isn't quite as risky.
- InstinctiveArcher
- Outfitter
- Posts: 4876
- Joined: May 2nd, 2015, 10:57 am
- Contact:
Re: Bow Building
Ahhh! I'll never be able to make another bow nowJimboCrow wrote:That's what she said!InstinctiveArcher wrote:Yeah, some of these guys are insane with some of the things they come up with. Always plenty of eye candy there!Radamus wrote: I like the shorter look to that one- Man, couple guys there know their sht building bows eh! The only scary part for me would be all that shaping on the riser.
The riser shaping isn't really that bad. A spindle sander cuts down on the time it takes, but using hand tools isn't that bad, and isn't quite as risky.
In hunting, impossible doesn't exist any more than a sure thing does. - Tom Miranda
- InstinctiveArcher
- Outfitter
- Posts: 4876
- Joined: May 2nd, 2015, 10:57 am
- Contact:
Re: Bow Building
It's funny how you think you'll have time to do something, and then somehow life happens and you wind up not having that time at all. That was the case this year with the bow that I was hoping to build. I was planning on doing another laminated longbow, but between classes and homework I haven't had the time. Anyways, I've been going a little stir crazy, and decided to do something I haven't done in a while. I've got a hickory stave that was given to me about 5 years ago that has been sitting in the basement waiting to be turned into a bow. I dug it out about a week ago and am going to see what I can get out of it. Just a warning, this build may go pretty slowly, but I'll get it done
This bow is planned right now to be about 66" long, which is as short as I can safely go with my draw length. There are really good bowyers out there that could make a shorter bow that would handle my draw, but I'm not one of them. Because of some knots on the back of the bow, I plan on backing it with rawhide.
First I took a draw knife and removed all of the outer bark. I then removed the stringier inner bark with a draw knife and a pocket knife. It's really important that you don't gouge the wood underneath when removing the inner bark.
Here it is cleaned up more. The small pockets of inner bark that I didn't get with a drawknife I scraped out with a pocketknife.
I'm not an expert when it comes to the drawknife and I inevitably will leave some spots a little bit flatter or a little rounder than I ought to . I take a pocket knife and scrape down the small ridges and bumps on the back of the stave until it is well rounded and uniform. I try and scrape so that the entire back of the bow is the same growth ring.
This evening I started roughly drawing out the bow shape. Nothing is set in stone yet, and the bow has some neat little twists that I'll need to figure out, but the lines are roughly what the bow will look like. Sorry that the lines are a bit difficult to see.
This bow is planned right now to be about 66" long, which is as short as I can safely go with my draw length. There are really good bowyers out there that could make a shorter bow that would handle my draw, but I'm not one of them. Because of some knots on the back of the bow, I plan on backing it with rawhide.
First I took a draw knife and removed all of the outer bark. I then removed the stringier inner bark with a draw knife and a pocket knife. It's really important that you don't gouge the wood underneath when removing the inner bark.
Here it is cleaned up more. The small pockets of inner bark that I didn't get with a drawknife I scraped out with a pocketknife.
I'm not an expert when it comes to the drawknife and I inevitably will leave some spots a little bit flatter or a little rounder than I ought to . I take a pocket knife and scrape down the small ridges and bumps on the back of the stave until it is well rounded and uniform. I try and scrape so that the entire back of the bow is the same growth ring.
This evening I started roughly drawing out the bow shape. Nothing is set in stone yet, and the bow has some neat little twists that I'll need to figure out, but the lines are roughly what the bow will look like. Sorry that the lines are a bit difficult to see.
In hunting, impossible doesn't exist any more than a sure thing does. - Tom Miranda
- InstinctiveArcher
- Outfitter
- Posts: 4876
- Joined: May 2nd, 2015, 10:57 am
- Contact:
Re: Bow Building
Yesterday I started taking the bow down to shape a little bit. I draw out the bow profile, but I also draw another line about a 1/4 inch out from what I want the actual bow to be. That way I've got plenty of room in case of a small error.
In order to work on the bow, I use a bow vice which holds the bow tightly in place when I am putting my foot on a pedal underneath and pressing down. I use a draw knife at this point to take of the majority of the wood. I love watching I curls of wood peel off with each stroke. It is definitely an arm workout though!
Here is the result of about an hour of scraping. One limb is pretty much down to the 1/4 inch line.
In order to work on the bow, I use a bow vice which holds the bow tightly in place when I am putting my foot on a pedal underneath and pressing down. I use a draw knife at this point to take of the majority of the wood. I love watching I curls of wood peel off with each stroke. It is definitely an arm workout though!
Here is the result of about an hour of scraping. One limb is pretty much down to the 1/4 inch line.
In hunting, impossible doesn't exist any more than a sure thing does. - Tom Miranda
- InstinctiveArcher
- Outfitter
- Posts: 4876
- Joined: May 2nd, 2015, 10:57 am
- Contact:
Re: Bow Building
Been doing a lot of scraping with the drawknife and rasp. I'm starting to take it down roughly to finished dimensions though and it's starting to look a bit like a bow. Looks like I'm going to end up with a knot right mid limb but that's alright. Just adds character. Starting to look more like a bow though.
In hunting, impossible doesn't exist any more than a sure thing does. - Tom Miranda
Who is online
Users browsing this forum: No registered users and 1 guest